1970-81 Camaro Upper Control A-Arm, 8-1/2 Inch

This upper control arm for 1970-1981 Camaro is designed to be used with the stock mount. Available in 8", 8-1/4", 8-1/2", 8-3/4", 9", 9-1/4", 9-1/2". This control arm requires the use of a K6024-style ball joint, which is equivalent a 1963-’71 Compatible with Chevy pickup style upper ball joint. It will have a 7 degree tapered stud and therefore, the stock Camaro spindle must be reamed to fit the pickup ball joint. Cross shaft mount bolts center on center. Measures 7-3/4". The arms are symmetrical. Note: This control arm does not use a stock Camaro ball joint, (all) of the ball joints that we offer require reaming stock spindle. Note: Our "length" reference refers to the distance from the center of the ball joint to the centerline of the cross shaft. The "stock" length of a Camaro upper A-arm is 9-1/4".

• This upper control arm for 1970-1981 Camaro bolts directly to the stock frame mount which is 7-3/4" center to center bolt spacing
• Requires a K6024 or K6136 style ball joint which are larger and heavier duty than the stock Camaro ball joint
• Larger ball joint requires reaming the Camaro spindles but will increase strength and have less problems bending ball joints
• Stock Camaro length is 9 1/4" but these are offered in a variety of other lengths to suit your needs
• Available in 8", 8-1/4", 8-1/2", 8-3/4", 9", 9-1/4" and 9-1/2" length which is measured center of ball joint to center of cross shaft