PATIKIL 20Pcs Ceiling Fan Blade Screws, 1/4"-20 x 3/8 Carbon Steel Phillips Pan Motor Replacement Screw for Lighting Ceiling Fan, Silver

What is this?These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.What will i get?Ceiling Fan Blade ScrewsColor: Silver;Material: Carbon Steel;Total Size: 8.6 x 13mm/0.34 x 0.51 Inch (DxL);Thread Size: 1/4"-20 UNC;Thread Length: 10mm/0.39 Inch.Are there any advantages of the product?Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.Universal Fit: Suitable for Most ceiling fans.Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers. How to use it?1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.3. Insert & Tighten: Hand-start the screw, then secure diagonallyWhat should I notice?1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.2. Compatibility: For wood/composite blades only; Metal blades require longer screws.3. Storage: Keep in a sealed bag to prevent washer oxidation.4. Replacement Tip: Replace all screws per fan.

• These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
• Ceiling Fan Blade Screws Color: Silver; Material: Carbon Steel; Total Size: 8.6 x 13mm/0.34 x 0.51 Inch(DxL); Thread Size: 1/4”-20 UNC; Thread Length: 10mm/0.39 Inch.
• Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise. Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings. Universal Fit: Suitable for Most ceiling fans. Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
• 1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws. 2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket. 3. Insert & Tighten: Hand-start the screw, then secure diagonally
• 1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts. 2. Compatibility: For wood/composite blades only; Metal blades require longer screws. 3. Storage: Keep in sealed bag to prevent washer oxidation. 4. Replacement Tip: Replace all screws per fan.