Windshield Washer Nozzles compatible with Cadillac CTS 2008-2015, Ford Chrysler Dodge, Front Wiper Sprayer Jets, 2 Pack - Washer Squirter Spray Set replaces 25815793, Click&Fit

Windshield Washer Nozzle - aftermarket replacement This is an aftermarket part that replaces OEM part numbers: 25815793, 58121. This is an aftermarket windshield washer nozzle, not a genuine part. Sold as a set of 2 nozzles (left and right) with 2 rubber gaskets. Compatible with Cadillac Models: CTS 2008-2015 May Also Fit (Verify Before Ordering): The following vehicles share the same nozzle family and likely accept this part. Compare your existing part side-by-side or check by VIN before purchasing. May also fit Chrysler: 300 2011-2023 - LX/LD platform May also fit Dodge: Charger 2011-2018 - LX/LD platform Challenger 2011-2017 - LX/LC platform May also fit Ford: Fusion 2008-2012 - CD3 platform May also fit Lincoln: MKZ 2008-2012 - CD3 platform May also fit Mercury: Milan 2008-2011 - CD3 platform Product Details: Mounting hole approximately 20.6 mm (0.81 inches) diameter Hose barb approximately 6 mm (0.24 inches) outer diameter, 90-degree side angle Dual-jet spray pattern, fixed angle (not adjustable) Color: black Set contents: 2 nozzles (left and right) plus 2 rubber sealing gaskets When to Replace: Replace when the factory nozzle becomes brittle and cracks, sprays weakly, clogs with mineral deposits, or no longer reaches the glass. Washer fluid pooling on the hood or a nozzle that has snapped off at the base are common failure signs. Installation: The nozzle is a snap-in insert that seats into the hood or cowl cutout, secured by a flexible locking clip, with a rubber gasket between the nozzle base and the panel. Secure the fluid hose before disconnecting the old nozzle so it does not slip into the cowl, then route it onto the 90-degree barb. Important Notes: Verify your existing nozzle mounting hole size against the 20.6 mm (0.81 inches) dimension before ordering, as aftermarket parts may look similar but differ in this measurement. The spray angle is preset and not adjustable after installation.

• Mounting hole approximately 20.6 mm (0.81 inches) diameter with a 90-degree side hose barb. Verify your existing nozzle hole size before ordering, as aftermarket parts may look similar but differ in this critical dimension.
• Replaces OEM part number 25815793 and aftermarket cross-reference 58121. This is an aftermarket windshield washer nozzle, not a genuine part. Sold as a set of 2 nozzles (left and right) with 2 rubber sealing gaskets for a complete front replacement.
• Compatible with Cadillac CTS 2008-2015, including Sedan, Coupe, Sport Wagon and CTS-V body styles. Front windshield position only, engine-independent fitment.
• Fan-jet spray design that matches the original two-stream pattern, molded in black to blend into the factory cowl and hood trim. The fixed-angle nozzle is not adjustable after installation.
• Spray angle is preset and aims at the lower-to-mid windshield, so verify your nozzle hole size against the 20.6 mm dimension before ordering. The 90-degree barb keeps the fluid hose from stretching during installation.
• Replaces OE# 25815793, 5182327AA, 68260029AA, 58147, 68081370AB, 68102968AA, 8E5Z-17603-A, 85381-04030